Click to enlarge Image is similar

• Circuit board and components, including heatsink
• Processor ATtiny2313
• without housing

• Every Booster needs its own power supply
• If more than one "Booster 2" are operated in a model railway layout, all of them must have the same firmware option installed (BiDi resp. Timer).
• The central station Z1 must be configured according to the selected firmware option (default: no BiDi)

• Protocol: DCC
• Output current (max.): ~4 A
• Kit version: 2.01
• Firmware version: 1.28 (BiDi), 0.23 (Timer)

This kit contains SMD components. However, soldering SMD components is much easier than expected ( 'Der richtige Umgang mit SMD' (Source: ELVjournal, German language)).

Construction manual, schematics and PCB layouts are delivered on a CD-ROM, including firmware (if applicable) and a great deal of additional information.

For more information, please visit  the product pages on the internet.

Difficulty level:

Click the clipboard icon to check the recommended tools for this kit.

The standard version of this kit consists of these components:   » 1 x PCB "Booster"         » 1 x ATtiny2313-20PU         » 1 x 74HC08N         » 1 x 7805         » 1 x L6203         » 1 x LM393P         » 1 x 1N4004         » 1 x LED, red, low current (3 mm)         » 2 x LED, yellow, low current (3 mm)         » 1 x LED, green, low current (3 mm)         » 1 x HCPL2631         » 1 x SFH628A-4         » 1 x Extruded heat sink, 3,5 K/W         » 2 x Wire wound resistor, 0.1 Ω, 1 W         » 1 x Wire wound resistor, 0.15 Ω, 3 W         » 1 x Carbon resistor, 4.7 Ω, 1/4 W         » 1 x Carbon resistor, 330 Ω, 1/4 W         » 1 x Metal film resistor, 432 Ω, 0.6 W         » 4 x Carbon resistor, 1.5 kΩ, 1/4 W         » 4 x Carbon resistor, 2.2 kΩ, 1/4 W         » 6 x Carbon resistor, 10 kΩ, 1/4 W         » 1 x Ceramic capacitor 4.7 nF         » 1 x Ceramic capacitor 10 nF         » 1 x Ceramic capacitor 12 nF         » 2 x Ceramic capacitor 15 nF         » 6 x Ceramic capacitor 100 nF RM5         » 1 x Film capacitor 100 nF MKT         » 2 x SMD multilayer capacitor 100nF (1206)         » 1 x Tantalum capacitor 0,22µF/35V         » 1 x Film capacitor 470 nF MKS2         » 1 x SMD multilayer capacitor 470nF (1206)         » 1 x Electrolytic capacitor, 10 µF / 50 V         » 1 x Electrolytic capacitor, 47 µF / 25 Volt         » 1 x Header 1x2 pin, straight, RM 2.54         » 1 x Jumper, open top, black         » 1 x Terminal block 2 ways, RM 5, grey         » 2 x Terminal block 3 ways, RM 5, grey         » 1 x IC socket, 14 pins         » 1 x IC socket, 20 pins         » 2 x IC socket, 8 pins         » 2 x IC socket, 2 pin, single row         » 1 x Nut M3         » 1 x Threaded Screw M3x10 Pan Head