Click to enlarge Image is similar

• Protocol: DCC
• Kit version: 2.01
• Firmware version: 0.13
• Length: 80 mm
• Width: 50 mm
• Height: 30 mm

This kit contains SMD components. However, soldering SMD components is much easier than expected ( 'Der richtige Umgang mit SMD' (Source: ELVjournal, German language)). You can also purchase this kit with partially preinstalled SMD components (see 'Available Options' below).

Construction manual, schematics and PCB layouts are delivered on a CD-ROM, including firmware (if applicable) and a great deal of additional information.

For more information, please visit  the product pages on the internet.

Difficulty level:

Click the clipboard icon to check the recommended tools for this kit.

The standard version of this kit consists of these components:   » 1 x PCB "Decoder"         » 1 x ATmega8515-16AU         » 1 x 7805         » 1 x MAX485CSA         » 1 x ULN2803         » 1 x BC860         » 1 x 1N4148         » 1 x B40C1500 (round)         » 2 x BAV199         » 2 x SMD Zener Diode 4.7 V (500 mW, SOD123)         » 1 x LED, red, low current (3 mm)         » 1 x 6N136         » 1 x LTV817A         » 1 x Carbon resistor, 100 Ω, 1/4 W         » 1 x Carbon resistor, 1 kΩ, 1/4 W         » 2 x Carbon resistor, 1.5 kΩ, 1/4 W         » 1 x Carbon resistor, 10 kΩ, 1/4 W         » 1 x SMD resistor, 10 kΩ (1206)         » 2 x SMD resistor, 22 kΩ (1206)         » 3 x Ceramic capacitor 100 nF RM5         » 1 x SMD multilayer capacitor 100nF (1206)         » 1 x Electrolytic capacitor, 100 µF / 16 Volt         » 1 x Electrolytic capacitor, 470 µF / 35 Volt         » 1 x PTC Resettable Fuse 0.5 A         » 1 x Shortstroke pushbutton 4.3 mm         » 1 x Header 2x3 pin, straight, RM 2.54         » 1 x Header 1x3 pin, straight, RM 2.54         » 1 x Header 1x5 pin, straight, RM 2.54         » 2 x Terminal block 2 ways, RM 5, grey         » 4 x Terminal block 3 ways, RM 5, grey         » 1 x IC socket, 18 pins         » 1 x IC socket, 8 pins         » 1 x IC socket, 6 pins